Forgefast Elite decking screws in tan, supplied in a handy tub. Countersinking self-drilling point, Torx drive, and a tan coating that blends with treated timber decking. Available in multiple sizes with bulk quantities per tub.
Available options and pricing for Torx-Fast Forgefast Elite Decking Screws - Tan - Tub, with quantity selectors and a running total
Size
QTY
SKU
Price
QTY
Total
4.5 x 50mm
600
FFDS4550TT
£18.98£22.78
—
4.5 x 60mm
500
FFDS4560TT
£18.98£22.78
—
4.5 x 75mm
400
FFDS4575TT
£18.98£22.78
—
5.0 x 100mm
300
FFDS5100TT
£18.98£22.78
—
The Forgefast Elite tan Torx decking screws are purpose-built for softwood and hardwood decking installations where a clean, discreet finish matters. The tan coating sits close enough to most treated deck boards that the screw head disappears into the surface rather than standing out against it. If you’ve ever finished a deck and been stared down by rows of bright silver screw heads, you’ll appreciate the difference.
These forgefast tan Torx decking screws use a self-drilling, countersinking point that bites cleanly without pre-drilling in most softwood applications. That speeds up installation considerably on a full deck run. The Torx drive reduces cam-out, which matters when you’re driving hundreds of screws in a day and can’t afford to keep stopping to change damaged bits.
What Makes the Forgefast Elite Suitable for Decking
The Forgefast Elite range is designed specifically for outdoor timber fixing, with a coating suited to the wet and dry cycling that decking goes through season after season. The screw geometry is optimised for pulling boards tight without splitting, even close to board ends where standard screws often cause problems.
The tub format is practical on site. No fumbling with cardboard boxes that go soggy in wet weather, and the lid keeps screws contained when you inevitably knock the tub over on a scaffolding board. Multiple size options mean you can match the screw length to your decking board and joist thickness properly, rather than just grabbing whatever’s closest.
Available in 4.5 x 50mm, 4.5 x 60mm, 4.5 x 75mm, and 5.0 x 100mm, with tub quantities ranging from 300 to 600 depending on size. Solid choice for any decking contractor running regular jobs.
Pro Tip: Drive Forgefast Elite screws at a slight angle toward the board centre when fixing close to the end grain, this reduces the risk of splitting without needing to pre-drill.
Forgefast Elite tan decking screws are used across residential and commercial decking projects for fixing softwood and hardwood deck boards to timber joists. They suit new deck builds, deck repairs, and replacement board fixing where a discreet finish is needed. The tan colour works particularly well with brown-treated softwood decking such as pressure-treated pine and C16 timber joists, and holds up well in exposed outdoor environments through all seasons.
Best For
Softwood decking boards
Hardwood decking
New deck construction
Deck board replacement
Timber joist fixing
Available In
4.5 x 50mm
4.5 x 60mm
4.5 x 75mm
5.0 x 100mm
Tub quantities: 300, 400, 500 or 600
Key Features
Tan coating for discreet finish
Torx drive head
Self-drilling countersinking point
Reduces cam-out
Suited to outdoor exposure
Tub format for site use
Not suitable for: Not recommended for fixing into metal or masonry. For composite decking boards with pre-grooved fixing systems, check manufacturer guidance before use as a face-fixed screw may not be appropriate.
In most softwood applications, these screws can be driven directly without pre-drilling. For hardwoods or positions close to board ends, a pilot hole reduces the risk of splitting. Use a Torx bit matched to the drive size and keep the driver speed moderate to maintain control on the countersink.
Space screws consistently across the run, typically one fixing per board at each joist crossing. Keep fixings at least 20mm from the board edge to avoid breakout. Check that your screw length leaves adequate penetration into the joist, at least 25mm is a reasonable minimum for a secure fix.
Select the correct screw length for your deck board thickness and joist depth.
Mark consistent fixing positions across each board to keep the finished deck looking tidy.
For hardwood boards or end-grain fixing positions, drill a pilot hole first.
Fit a correctly sized Torx bit to your drill or impact driver.
Position each screw square to the board surface and drive at moderate speed.
Allow the self-countersinking point to seat the head flush without over-driving.
Check fixings are secure and heads are flush before moving on.
Do the Forgefast Elite tan decking screws need pre-drilling in softwood?
Generally no. The self-drilling point handles most softwood decking without pre-drilling. For hardwood boards or fixings close to the end of a board, a pilot hole is worth the extra step to avoid splitting.
Will the tan coating hold up outdoors over time?
The Forgefast Elite coating is designed for outdoor use and the wet and dry conditions that decking sees year-round. It is not a stainless steel screw, so in very aggressive coastal or marine environments a stainless option may be more appropriate, but for standard domestic and commercial decking it performs well.
Forgefast Elite decking screws are manufactured with a hardened steel shank and a proprietary tan surface coating engineered for outdoor timber applications. The self-drilling, countersinking point profile reduces installation time and the Torx recess provides a positive drive engagement that holds under load from an impact driver. The tan finish is selected to blend with common brown-treated softwood decking timbers.
Drive Type
Torx
Head Type
Countersinking
Point Type
Self-drilling
Coating Colour
Tan
Available Sizes
4.5 x 50mm, 4.5 x 60mm, 4.5 x 75mm, 5.0 x 100mm
Pack Format
Tub
Tub Quantities
300, 400, 500, 600
Application
Outdoor timber decking
Size
4.5 x 50mm, 4.5 x 60mm, 5.0 x 100mm, 4.5 x 75mm
Box Quantity
300, 400, 500, 600
Reviews
There are no reviews yet.
Be the first to review “Torx-Fast Forgefast Elite Decking Screws – Tan – Tub”Cancel Reply
Reviews
There are no reviews yet.