Bulk trade packs of Unifix masonry nail on pipe clips in 10mm, 15mm and 22mm sizes. Three pack options available to suit different job volumes. Good value for plumbers, heating engineers and general builders who go through clips regularly.
Size
Price
QTY
pack 1
£109.00£130.80
pack 2
£79.00£94.80
pack 3
£119.00£142.80
Unifix masonry nail on clips are a staple on any plumbing or heating job where pipes need securing directly to masonry, brick or blockwork. The nail-on design means no drilling, no plugs and no rawl bolts — you position the clip, drive the nail, and move on. When you are fitting first fix pipework across a whole house or working through a stack of radiator drops, that speed adds up quickly.
These bulk trade packs are put together to give you a sensible mix of sizes at a price that makes sense when you are buying in volume. Whether you need a single size in large quantities or a mixed pack covering the most common pipe diameters, there is an option here that will suit most jobs.
Masonry Nail on Clips Pack Options
Pack 1 gives you 3000 clips in 15mm, which covers standard 15mm copper or plastic pipe and is the size you will reach for most on a typical domestic heating job. Pack 2 is a mixed selection: 1000 x 10mm, 1000 x 15mm and 500 x 22mm, covering the full range from microbore up to 22mm mains pipe. Pack 3 steps up the volume with 1000 x 10mm, 2000 x 15mm and 500 x 22mm, giving you more of the 15mm that tends to disappear fastest on site.
All three packs use genuine Unifix nail on clips, which are a well-established choice across the trade. The clips are made to take a standard masonry nail cleanly without splitting or distorting, and they hold pipe firmly without over-gripping or crushing softer plastic pipe.
Buying in bulk means fewer trips to the merchant and less chance of running short mid-job. These packs are particularly useful for heating installers, plumbers on new builds, and anyone doing a full bathroom or kitchen refit where clip quantities mount up fast.
Pro Tip: Always carry a selection of sizes on first fix jobs: 10mm and 15mm disappear fast, but running out of 22mm clips when you are halfway through a boiler feed run is exactly the kind of delay that costs you an afternoon.
Unifix masonry nail on clips are used to secure copper and plastic pipe to masonry walls, brick, and dense blockwork in domestic and light commercial plumbing and heating installations. Typical applications include first fix pipework runs, radiator feeds, boiler connections, and bathroom supply lines. They are widely used by plumbers and heating engineers working on new builds, extensions, and full property refurbishments where speed of installation matters.
Best For
First fix plumbing and heating pipework
Securing pipe to brick and masonry walls
New builds and full property refurbishments
Radiator feeds and boiler connections
High-volume installs where speed matters
Available Sizes
10mm pipe clips
15mm pipe clips
22mm pipe clips
Pack Options
Pack 1: 3000 x 15mm
Pack 2: 1000 x 10mm, 1000 x 15mm, 500 x 22mm
Pack 3: 1000 x 10mm, 2000 x 15mm, 500 x 22mm
Suitable for copper and plastic pipe
Nail-on design, no drilling required
Not suitable for: Not suitable for securing pipe to timber joists or stud partitions, where a saddle clip and screw would be more appropriate. These clips are designed for masonry and dense block substrates only.
Position the masonry nail on clip over the pipe at the required fixing point. Hold the clip flat against the masonry surface and drive the nail through the clip collar using a hammer. The clip should sit flush against the wall with the pipe held firmly but without excessive compression. Standard nail spacing for most domestic pipework runs is around every 500mm on horizontal runs and every 800mm on vertical drops, though always follow the relevant pipe manufacturer guidelines for the specific pipe type.
Mark out your pipe run and identify fixing points on the masonry surface.
Position the pipe against the wall at the first fixing point.
Place the masonry nail on clip over the pipe with the nail hole aligned against the masonry.
Hold the clip firmly flat against the wall and drive the nail through the clip using a hammer.
Check the clip sits flush and the pipe is secure but not crushed.
Repeat at each fixing point along the run, spacing as required for the pipe size and type.
Which pack is best for a typical domestic heating installation?
Pack 2 or Pack 3 are the most practical choices for a full domestic heating job. Both cover 10mm, 15mm and 22mm sizes, which between them handle the majority of pipework you will encounter. Pack 3 gives you more 15mm clips, which is the size that tends to run out first on a standard heating system with multiple radiator circuits.
Are these clips suitable for plastic pipe as well as copper?
Yes, Unifix masonry nail on clips work with both copper and plastic pipe. The clip is sized to the pipe outside diameter, so as long as you are using the correct size clip for your pipe, plastic pipe including barrier pipe and standard MDPE will sit and hold correctly without distortion.
Unifix masonry nail on clips are manufactured to accept standard masonry nails and are sized to the outside diameter of common plumbing pipe in 10mm, 15mm and 22mm variants. The clips are designed for direct fixing into brick, mortar joints and dense masonry block without pre-drilling. Material construction provides sufficient rigidity to retain pipe under normal thermal movement without cracking or deforming the clip body.
Brand
Unifix
Product Type
Masonry Nail on Pipe Clips
Available Sizes
10mm, 15mm, 22mm
Pack 1 Contents
3000 x 15mm clips
Pack 2 Contents
1000 x 10mm, 1000 x 15mm, 500 x 22mm clips
Pack 3 Contents
1000 x 10mm, 2000 x 15mm, 500 x 22mm clips
Fixing Method
Masonry nail (nail-on, no drilling required)
Suitable Substrates
Brick, masonry, dense blockwork
Compatible Pipe Types
Copper and plastic pipe
Weight
N/A
Size
pack 1, pack 2, pack 3
Box Quantity
1
Product Type
Unifix Masonry Nail on Pipe Clips
Reviews
There are no reviews yet.
Be the first to review “Unifix / FM Products Masonry Nail on Clips – Bulk Trade Deals”Cancel Reply
From £1.75£2.10 EX VATINC VAT Select options This product has multiple variants. The options may be chosen on the product page
From £6.89£8.27 EX VATINC VAT Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.