Hamilton For The Trade 3281132-90 Medium Pile Paint Roller Set 9″ (7 pcs)
SKU: HFT-3281132-90
Categories: Building Products, Decorating, Roller Tray Sets
Tags: set, tray
Brand: Hamilton
£7.49£8.99 EX VATINC VAT
A complete 7-piece roller kit from Hamilton’s For The Trade range. Includes five 9″ medium pile poly blend sleeves, a 5-wire cage frame, and a recycled plastic tray. Good pick-up, reduced spatter, and easy to clean after use.
The Hamilton 9 inch paint roller set from the For The Trade range gives you everything in one box: five medium pile sleeves, a solid cage frame, and a tray. No hunting round for a matching sleeve size or discovering the tray is the wrong width when you’re already halfway up a ladder. It’s a practical kit aimed squarely at decorators and tradspeople who want to get on with the job.
The sleeves are made from a poly blend fabric that picks up paint well and releases it evenly across the surface. Medium pile puts it in the right territory for smooth to semi-smooth walls and ceilings — the kind of surfaces that make up the bulk of interior decorating work. The fabric is heat-fused to the core, which matters more than it sounds. A sleeve that unravels mid-job is one of those small annoyances that costs time and wastes paint, so this detail is worth having.
What the Hamilton 9″ Roller Set Includes
You get five sleeves in the set, which gives you a bit of flexibility — swap out between colours, keep one for cutting in, or simply have spares ready when the first one needs a rinse. The 5-wire cage frame holds the sleeve securely without any wobble or movement during use. The 1.75 inch core is a standard size, so if you ever need replacement sleeves, they’re easy to source.
The tray is made from 100% recycled material, which is a reasonable thing for Hamilton to do and costs you nothing. It’s ridged, which helps with loading the roller evenly and avoids the puddle of paint that flat-bottomed trays tend to create.
Paint Compatibility
This set works with emulsion, water-based eggshell, and solvent-based paints. That covers the vast majority of interior wall and ceiling work. The reduced spatter design keeps overspray manageable, which is always welcome when you’re working near skirting boards or freshly laid flooring.
At this price point, the Hamilton 9 inch paint roller set makes sense as a site staple. Keep a box on the van, use them properly, clean them after each coat, and they’ll see you through several jobs without complaint.
Pro Tip: Before using a new sleeve, dampen your hand and run it over the fabric to pull off any loose fibres — skip this step and you'll spend the first ten minutes picking lint out of your freshly painted wall.
This roller set is built for interior walls and ceilings, covering large areas quickly with emulsion or water-based eggshell. It works well on plasterboard, plaster, and lightly textured surfaces where a medium pile gives the right balance of coverage and finish. It's particularly useful on new builds and refurb sites where you're doing room after room and need a consistent, repeatable result without fussing over equipment.
Best For
- Interior walls and ceilings
- Smooth to semi-smooth surfaces
- Emulsion painting
- Large area coverage
- New build and refurb interiors
Compatible Paints
- Emulsion
- Water-based eggshell
- Solvent-based paints
Key Features
- 5 x 9" medium pile poly blend sleeves included
- Fabric heat-fused to core — won't unwind
- 5-wire cage frame for secure sleeve fixing
- Reduced spatter design
- 1.75" standard core
- Ridged tray from 100% recycled material
- Easy to clean after use
Not suitable for: Not ideal for heavily textured or rough masonry surfaces, where a longer pile sleeve would give better coverage. Not designed for exterior use.
Give each new sleeve a quick wipe-down with a damp hand before first use to remove any loose fibres. Pour paint into the tray, load the roller by rolling it back and forth across the ridged section, and apply to the surface using even, overlapping strokes. Avoid pressing too hard — let the sleeve do the work.
After use, remove as much paint as possible by rolling out on an old board or sheet, then rinse thoroughly with clean water. Stand the sleeve on its end to dry. Cleaned properly after each use, the sleeves will last across multiple coats.
- Dampen your hand and run it firmly over the sleeve before first use to remove loose fibres
- Fit the sleeve onto the 5-wire cage frame and check it seats securely with no movement
- Pour paint into the deep end of the tray to a reasonable working depth
- Load the roller by rolling it across the ridged section of the tray until evenly coated
- Apply paint to the surface using overlapping strokes in a W or M pattern to spread evenly
- Reload the roller regularly to maintain consistent coverage and avoid dry dragging
- After use, roll out excess paint on scrap material, remove the sleeve, and rinse thoroughly with clean water
- Stand the cleaned sleeve on its end to dry before storing
How many sleeves are included in the set?
You get five 9 inch medium pile sleeves, plus a 5-wire cage frame and a ridged tray. That gives you enough to rotate between colours or keep spares on hand without needing to buy sleeves separately.
Can these sleeves be reused after washing?
Yes. The fabric is heat-fused to the core so it won't unwind or fall apart during washing. Rinse thoroughly with clean water after use, stand on end to dry, and they'll perform well across multiple coats. Results will vary depending on how thoroughly they're cleaned and which paint was used.
The sleeves are constructed from a poly blend fabric heat-fused to a 1.75 inch core, which prevents the fabric from separating during use or washing. The cage frame uses a 5-wire design for a secure, wobble-free fit. The tray is injection-moulded from 100% recycled plastic with a ridged loading surface. Medium pile depth suits smooth to semi-smooth interior surfaces and is appropriate for emulsion and water-based eggshell application.
| Roller Width | 9 inch (229mm) |
|---|---|
| Pile Type | Medium pile |
| Sleeve Material | Poly blend fabric |
| Core Diameter | 1.75 inch |
| Frame | 5-wire cage |
| Contents | 5 x 9" medium pile sleeves, 1 cage frame, 1 tray |
| Tray Material | 100% recycled plastic |
| Compatible Paints | Emulsion, water-based eggshell, solvent-based paints |
| SKU | HFT-3281132-90 |
Be the first to review “Hamilton For The Trade 3281132-90 Medium Pile Paint Roller Set 9″ (7 pcs)”Cancel Reply
You may also like…

ProDec TROJAN Pro Synthetic Brush Set – 6 Piece
£9.90£11.88 EX VATINC VAT
Professional Roller Frame & Tray Set 9″
£8.93£10.72 EX VATINC VAT
Contractors Roller Frame & Tray Set 9″
£7.89£9.47 EX VATINC VAT
Prodec PREMIER Advanced Pro 6 Piece Synthetic Paint Brush Set
£14.95£17.94 EX VATINC VAT
Related products

Stanley Chalk Line & Blue Builders Chalk 30m
£6.74£8.09 EX VATINC VAT
9 inch Medium Pile Roller Set – Fit For The Job – 3pc
£2.39£2.87 EX VATINC VAT
Professional Synthetic Paint Brush Mixed Set (5 pieces)
£11.18£13.42 EX VATINC VAT
Professional Synthetic Paint Brush Mixed Set (3 pieces)
£5.85£7.02 EX VATINC VAT




Reviews
There are no reviews yet.