Peel Tec from CT1 strips paint in under ten minutes without heat guns, harsh chemicals or mechanical scraping. Spray on, wait, peel off. Works on most surfaces without damaging the base material, leaving a clean surface ready for recoating.
Peel Tec is a fast-acting paint remover from CT1 that takes the misery out of stripping old coatings. Anyone who has spent hours with a heat gun, chemical stripper or scraper knows how tedious paint removal can be. This aerosol spray changes that entirely. Apply it to the painted surface, wait less than ten minutes, and watch the coating lift away in satisfying sheets. No burning, no toxic fumes filling the room, no risk of scorching timber or warping plastic.
How Peel Tec Makes Paint Removal Simple
The aerosol comes with a precision nozzle that delivers just the right amount of product where you need it. This means less waste and better control, especially on detailed work like window frames, skirting boards or intricate mouldings. The formula works its way under the paint film and breaks the bond with the substrate, allowing you to peel or scrape the coating away cleanly.
What sets this product apart is how gentle it is on base materials. Whether you are working on timber, metal, masonry, plastic or even fibreglass, Peel Tec removes the paint without attacking what lies beneath. This makes it particularly useful for restoration work where preserving the original surface matters. Decorators, maintenance teams and DIY enthusiasts finally have a paint stripper that does not require protective suits and industrial ventilation.
Ready for Recoating
Once the old paint is removed, the surface is left clean and properly prepared for fresh coatings. No residue to sand off, no chemical contamination to neutralise. You can move straight to priming and painting, which saves considerable time on refurbishment projects.
The handy aerosol format means you can keep a can in the van for touch-up jobs, window repairs or quick strip-backs on site. It is far more convenient than lugging around tins of paste stripper and waiting hours for them to work.
Trade Tip: For thicker paint layers or multiple coats, apply a generous amount and give it the full ten minutes before attempting to peel. Rushing it just means a second application.
Peel Tec is used wherever old paint needs removing quickly and cleanly. Decorators use it for stripping window frames, door furniture and skirting boards before repainting. It is equally useful for maintenance work on metal railings, radiators and pipework where heat guns risk damage or fire. Restoration specialists appreciate how it removes coatings from delicate surfaces like ornate plasterwork or antique furniture without harming the original material. The aerosol format makes it practical for both workshop use and on-site applications where portability matters.
Best For
Stripping paint from window frames and doors
Removing coatings from metal railings and radiators
Restoration work on timber and ornate surfaces
Quick strip-backs on site work
Preparing surfaces for recoating
Compatible Materials
Timber and hardwood
Metal and steel
Masonry and brick
Plastic and uPVC
Fibreglass
Key Features
Works in under 10 minutes
No heat or harsh solvents required
Does not damage base materials
Precision nozzle for controlled application
Leaves surface ready for recoating
Not suitable for: Not recommended for use on surfaces where the base material is unknown or potentially reactive. Always test on an inconspicuous area first when working with unusual substrates or historic finishes.
Shake the can well before use. Hold the aerosol upright and spray evenly across the painted surface from around 15 to 20 centimetres away. Allow the product to work for up to ten minutes. You will see the paint begin to bubble and lift. Once ready, peel or scrape the coating away and wipe the surface clean before applying fresh paint or primer.
Shake the aerosol thoroughly before use
Spray evenly onto the painted surface from 15 to 20cm distance
Allow up to 10 minutes for the product to work
Watch for the paint to bubble and lift from the surface
Peel or scrape away the loosened coating
Wipe the surface clean with a dry cloth
Apply primer or fresh paint once the surface is prepared
Will Peel Tec damage timber or plastic surfaces?
No. The formula is designed to break the bond between the paint and the substrate without attacking the base material. It is safe to use on timber, plastic, metal, masonry and fibreglass when used as directed.
How many coats of paint will one application remove?
One application typically removes one to two coats of paint. For surfaces with multiple layers or thick build-up, you may need to repeat the process. Allowing the full ten minutes before peeling gives the best results.
Do I need to neutralise the surface after using Peel Tec?
No neutralising is required. Once you have removed the paint and wiped the surface clean, it is ready for priming and recoating straight away.
Peel Tec is a solvent-based paint remover in aerosol form, formulated to penetrate and lift paint films without the need for heat or mechanical abrasion. The product works by breaking the adhesion between the coating and the substrate, allowing clean removal. It is non-corrosive to common building materials and leaves no residue that would interfere with subsequent coatings.
Brand
CT1 / C-Tec
Product Type
Paint Remover
Format
Aerosol Spray
Working Time
Under 10 minutes
Application Method
Spray on, peel off
Suitable Substrates
Timber, metal, masonry, plastic, fibreglass
Size
Peel Tec
Reviews
There are no reviews yet.
Be the first to review “Peel Tec – CT1”Cancel Reply
Reviews
There are no reviews yet.