Everbuild Resiblock Superior Block Paving Sealer 5 litre – Matt or Gloss

Everbuild Resiblock Superior Gloss Block Paving Sealer 5 litre Resiblock Superior Original Gloss is a tough Gloss Finish solvent based, long lasting Paving coating that ensures there is no loss of jointing sand from pressure washing weathering or trafficking. Prevents weed and grass growth as well as food and drink stains.   Resiblock Superior Original Gloss can be used on either new or old paving to enhance the look and is ideal for use on concrete block paving.   Solvent Based sealer used to bond jointing sand and seal the surface of concrete block paving, whilst retaining its normal flexural properties. Available in a wet look or matt finish.

• Ideal to bond jointing sand and seal the surface of concrete block paving.
• Retains its normal flexural properties.
• Resistant to chipping and peeling.
• Resists oil and diesel stains.
• Prevents staining and fading.
• Hard wearing, durable.
• long lasting.
• weather resistant.
• Unaffected by water or ice.
• Enhances lost colour in older paving.
• Provides a water resistant bond.
• Available in a wet look or matt finish.

Application All surfaces and jointing sand must be dry and free from dirt. Only apply when there is no risk of rain within the next 12 hours. Apply to new laid paving after initial 8 weeks and refurbished paving after 2 weeks. Apply to edges of paving with a paint brush and evenly to the main areas using a roller. 2 coats are required. Leave a minimum of 3 hours and a maximum of 24 hours between the first and second coats. Avoid walking on sealed areas for 3 hours after application and do not drive vehicles on the surface for 24 hours. Resiblock Superior will normally be touch dry within an hour and cure sufficiently in 3-6 hours (200C) to accept foot traffic. Full cure is achieved over 1-2 days. During initial drying period, keep children and pets away from the treated surfaces.