Ceiling Anchors – Zinc – Box 100
From £4.95£5.94 EX VATINC VAT
Zinc steel hammer-set ceiling anchors for fixing sheet metal, plastic or timber to concrete and masonry overhead. Fast to install with no mixing or specialist tools. Supplied in a box of 100.
| Size | Price | QTY |
|---|---|---|
| 6.0 x 40mm | £4.95£5.94 | |
| 6.0 x 65mm | £6.98£8.38 |
Timco ceiling anchors zinc are a hammer-set fixing designed for light duty overhead applications. Each anchor is pressed home with a hammer, making them quick to install in concrete and masonry ceilings without the need for bolts, resins or setting tools. They are a sensible choice when you need to run a large number of fixings fast and do not want to be reaching above your head any longer than necessary.
Made from steel with a zinc finish, these anchors resist the kind of surface corrosion you would expect in damp or humid environments, such as plant rooms, car parks, or below-ground areas. The zinc coating also holds up reasonably well in unheated or ventilated spaces where moisture is a factor without being a constant problem.
Where Timco Ceiling Anchors Are Used
The most common application is suspending lightweight services from concrete soffits. Electrical conduit, pipe clips, cable tray hangers, and lightweight ductwork brackets all fall within the capability of these anchors when used correctly and at appropriate centres. They are equally useful for fixing timber battens or plastic channel to masonry walls where a simple mechanical fix is preferred over adhesive or resin.
The 6.0mm diameter is consistent across both sizes available. The 40mm version suits thinner concrete or blockwork where embedment depth is limited, while the 65mm option gives a deeper bite into the substrate and is better suited to heavier base materials or where additional holding strength is needed.
Hammer-Set Installation
There is no torquing, no chemical cartridge, and no waiting around. The anchor locates in the pre-drilled hole and sets when the pin is driven home. This makes them well suited to repetitive fixing tasks where pace matters. A box of 100 covers a fair stretch of first fix services installation without the need to keep ordering small quantities.
These ceiling anchors zinc fixings are stocked in both 40mm and 65mm lengths, so you can pick the right depth for the substrate you are working with.
Pro Tip: Always drill the hole to the correct diameter and clear the dust out before setting the anchor, as a loose or debris-filled hole will reduce holding strength considerably in overhead applications where gravity is already working against you.
Reviews
There are no reviews yet.