Easiseal pro waterproofing compound – bondit

Bond It Easiseal Pro is a flexible, ready-to-use waterproofing compound designed for sealing and repairing problem areas where water finds a way in. If you have searched for a bond it easiseal waterproofing compound that works without faff, this is the one. It goes on thick, bonds well to most common building substrates, and cures to a tough, weatherproof film that moves with the structure rather than cracking away from it.

It is a single-part product, which matters more than it sounds. No mixing, no ratios to get wrong, no wasted material because you misjudged the pot life. Open the tub, apply it, and get on with something else. That simplicity is what makes it practical for site repairs, maintenance work and emergency weatherproofing where time is not on your side.

Where Easiseal Pro Waterproofing Compound Gets Used

The product is aimed squarely at the kind of jobs that come up regularly in roofing, general building maintenance and refurbishment. Flat roof details, parapet gutters, valley gutters, flashings, around chimney stacks, skylight surrounds, and anywhere water tends to pond or track behind a joint. It works on most mineral surfaces, metals, and many plastics, so you are not hunting for a different product every time the substrate changes.

Crack and Joint Sealing

Easiseal Pro handles fine cracks and open joints without needing a backer rod or primer on most surfaces. For larger voids, bed in some reinforcing tape or open-weave fleece before applying a second coat. The compound encapsulates it cleanly and gives the repair far better long-term movement tolerance than a simple filler would.

It is available in grey and black, so you can match the existing finish on most roof coverings without painting over the repair. The black suits felt and bitumen surfaces; the grey works well on concrete, asbestos cement sheeting and lead flashings. Both cure to a permanently flexible film that handles UV exposure and standing water without failing at the edges.