Heavy Duty Floor Card Protection Roll 1m x 50m 700 Micron
£55.00£66.00 EX VATINC VAT
Florprotec heavy duty floor card protection roll, 1m wide x 50m long at 700 micron thickness. Temporary floor protection for hard floors on active building sites. Recyclable, vapour-permeable, and cost-effective for short to medium-term projects.
Florprotec Floor Card Protection Roll is a heavy duty floor card solution designed to protect hard floors during construction, fit-out, and renovation work. At 700 micron thickness, this 1m x 50m roll gives you a solid layer of temporary protection against scuffs, dust, foot traffic, and the general punishment that floors take on a working site. It covers 50 square metres per roll, making it a straightforward choice for larger floor areas where lighter grades simply will not hold up.
Floor card protection like this is used when a job does not require flame retardant materials but does need reliable day-to-day coverage. The 700 micron rating places this firmly in the heavy duty category, offering noticeably better resilience than economy grades. If you have got a tiled hallway, polished concrete, or a newly laid hard floor that needs to survive a fortnight of tradespeople walking over it, this is the grade to reach for.
The roll is 1m wide, which suits single-lane corridor and hallway coverage well and also works across larger open floors when sheets are laid side by side. It is light enough to move around site without effort, but the 700 micron thickness means it stays put underfoot rather than bunching or tearing at the edges.
Where Heavy Duty Floor Card Gets Used
This product is a practical choice across residential and commercial projects alike. Builders, decorators, flooring contractors, and facilities teams all use floor card protection as a matter of course. It protects floors from paint drips, plaster dust, dropped tools, and constant foot traffic without costing a significant amount of the job budget. Given that it is recyclable, it is also a straightforward option for contractors managing site waste responsibly.
The Florprotec range covers multiple grades, and the 700 micron heavy duty version makes sense when protection needs to last more than a few days or when site activity is heavier than normal. Lighter grades suit short visits and clean trades; this one suits prolonged works where floors need coverage from first fix through to handover.
Vapour Control
The vapour control properties of this floor card mean moisture can still pass through, which matters when protecting floors over subfloor materials or where trapped moisture could cause problems. It is worth noting this is not a waterproof membrane, but the vapour permeability helps prevent condensation buildup under the protection layer during longer-term installation.
At £55.00 for a 50-metre roll, the cost per square metre is competitive for heavy duty temporary protection. It is also available in a range of sizes including 1m x 25m, 1m x 100m, 2m x 50m, and 2m x 100m, so you can match the roll dimensions to the job rather than cutting down and wasting material. Bulk rolls suit larger commercial sites; shorter rolls are easier to handle on domestic jobs.
Pro Tip: Tape sheet edges to the skirting or adjacent sheets with low-tack masking tape rather than standard packing tape, so removal at the end of the job does not lift any floor finish underneath.
You may also like…


Florprotec Tuff Board Heavy Duty Floor Protection Roll 1m x 25m

CORREX® Protection Sheet Boards 2.4m x 1.2m – 3mm Thick
From£4.89Typically £5.19Save £0.30 (100+ Units) Select options This product has multiple variants. The options may be chosen on the product page











Reviews
There are no reviews yet.