Heavy duty 450 micron card floor protection roll, 1m wide. Ideal for protecting hard floors on active construction and refurbishment sites. Low cost, recyclable, and available in 30m, 50m and 100m lengths.
Available options and pricing for Florprotec Heavy Duty Floor Card Protection Roll 1m - 450 Micron, with quantity selectors and a running total
Size
SKU
Price
QTY
Total
1m x 100m
FB100
£69.00£82.80
—
1m x 50m
FB50
£39.00£46.80
—
1m x 30m
FB30
£25.90£31.08
—
Florprotec Heavy Duty Floor Card Protection Roll is a 450 micron temporary floor protection solution for construction, fit-out, and refurbishment sites. At 1m wide, this floor protection roll covers hard floor surfaces efficiently, protecting against scuffs, scratches, dust, and the general punishment of site traffic. It is used wherever a hard floor needs to stay in good condition while work is carried out around it.
The 450 micron thickness puts this firmly in the heavy duty category. That extra weight compared to economy-grade card makes a practical difference when trades are moving across it repeatedly, shifting materials, or dragging equipment. It holds its position better underfoot and takes more punishment before it needs replacing.
Where Florprotec Floor Protection Roll Gets Used
This is a product for sites where cost matters but the floor still needs looking after. New builds, fit-outs, renovations, and commercial refurbishments all put hard floors at risk during the final stages of construction, when finishes are down but the site is still active. Tile, stone, hardwood, LVT, polished concrete — any surface that is difficult or expensive to repair benefits from this kind of temporary cover.
The roll format makes it practical for large areas. At 1m wide you can lay it out across corridors, hallways, open plan areas, and stairways relatively quickly, cutting to length on site with a knife or scissors. Multiple rolls can be overlapped and taped to cover wider areas without gaps.
Vapour Control and Recyclability
The Florprotec card roll includes vapour control properties, which is worth knowing when you are covering freshly laid or recently treated floors. Trapping moisture under protection is a common cause of adhesive failure and surface staining, so a product that manages vapour rather than sealing it in is genuinely useful on live sites. The material is also recyclable, which makes it easier to meet site waste requirements without a separate disposal stream.
This floor protection roll is not flame retardant, so it is suited to sites where fire-rated protection is not specified. For the majority of standard fit-out and construction projects that is not a requirement, and this product covers those applications well at a competitive price.
Three roll lengths are available: 30m, 50m, and 100m. The 100m roll is the better buy for larger sites or repeated use across multiple areas — the price per metre drops and you are not running out mid-job. The 30m option suits smaller contracts or targeted areas where a full roll would see most of it sitting in the van.
Overall, this is a straightforward, dependable floor protection roll that does what it needs to do without overcomplicating things. It is cost-effective, widely used across the trade, and available in the lengths that match how sites actually work.
Pro Tip: Tape the edges and overlaps down with low-tack masking tape rather than standard packaging tape, so you can lift the protection cleanly without leaving residue on the finished floor underneath.
Florprotec 450 micron floor protection roll is used across construction, fit-out, and renovation sites to protect hard floor finishes during active work. It suits tile, stone, hardwood, LVT, and polished concrete where surface damage from foot traffic, tools, or materials would be costly to repair. It is commonly laid in corridors, hallways, open plan areas, and stairways during the final stages of a build when finishes are down but the site remains busy.
Best For
Protecting hard floors on active construction sites
Fit-out and commercial refurbishment projects
Short to medium term temporary floor protection
Corridors, hallways, and open plan areas
Stairways and high-traffic routes
Compatible Surfaces
Ceramic and porcelain tile
Natural stone
Hardwood and engineered timber floors
LVT and vinyl flooring
Polished concrete
Key Properties
450 micron heavy duty thickness
1m wide roll format
Available in 30m, 50m, and 100m lengths
Vapour control layer
Recyclable material
Not flame retardant
Not suitable for: This roll is not flame retardant and should not be used on sites where fire-rated floor protection is specified. It is intended for temporary use only and is not a long-term flooring solution.
Roll out the Florprotec card directly onto the floor surface, cutting to length with a knife or scissors on site. Butt or slightly overlap adjacent runs and secure edges and joins with low-tack tape to prevent movement and stop debris getting underneath. Check the protection periodically on long projects and replace sections that become saturated, torn, or heavily worn.
Clear the floor surface of debris and ensure it is dry before laying the protection
Roll out the card in the direction of travel across the area being protected
Cut to length using a knife or scissors as required
Overlap adjacent strips by 50–100mm to avoid gaps
Secure all edges and overlaps with low-tack tape to prevent lifting
Inspect the protection regularly during the project and replace any damaged sections
Is this floor protection roll suitable for use over underfloor heating?
Yes, it can be used over underfloor heating systems, but keep the heating at a low or ambient setting while protection is in place. Excessive heat can dry out the card and reduce its protective properties, and prolonged heat build-up underneath any temporary protection is not ideal for most floor finishes.
Can the roll be used outside or in wet conditions?
This product is designed for interior use on hard floors. It is not waterproof and will lose its protective properties if it becomes saturated. For exterior or wet area protection, a polythene or foam-backed product would be more appropriate.
Which roll length should I order for a large site?
The 100m roll is the most cost-effective option for larger sites or where protection is needed across multiple areas. The 50m roll suits medium-sized jobs, and the 30m roll is practical for smaller contracts or targeted use where a full 100m roll would go to waste.
Florprotec Floor Card Protection Roll is manufactured from recycled and recyclable card board at a 450 micron gauge, classifying it as heavy duty within the card protection range. The material incorporates vapour control properties to reduce moisture build-up beneath the sheet. It does not carry a flame retardant rating and is intended for temporary indoor protection of hard floor surfaces during construction and fit-out activity.
Width
1m
Available Lengths
30m, 50m, 100m
Thickness
450 micron
Grade
Heavy Duty
Flame Retardant
No
Vapour Control
Yes
Recyclable
Yes
Application
Temporary indoor hard floor protection
Size
1m x 100m, 1m x 30m, 1m x 50m
Reviews
There are no reviews yet.
Be the first to review “Florprotec Heavy Duty Floor Card Protection Roll 1m – 450 Micron”Cancel Reply
Reviews
There are no reviews yet.