Hall Clips Lead Flashing Clips 6-18mm (Bag of 50)

Hall Clips are stainless steel lead flashing clips designed by a working roofing contractor who had one too many lead wedges drop out at the wrong moment. The result is a V-shaped, high-tensile clip that holds lead flashing firmly in a masonry joint in seconds, without cutting, without hammering, and without the wedge disappearing into the gutter. For anyone fitting lead flashing clips regularly, these are the sort of product you try once and do not go back from.

Each clip handles joints from 6mm to 18mm, which covers the vast majority of brick and stonework on domestic and commercial roofing work. Push the clip into the raked joint, feed the lead flashing behind it, and the V-shape grips the material securely straight away. You can then dress the lead accurately without it pulling away from the wall, which makes for a neater finish and a more reliable point. The manufacturer’s claim of up to 20 times faster than traditional lead wedges is not hard to believe once you have used them on a full run of step flashing.

Why Roofers Choose Hall Clips Over Lead Wedges

The traditional wedge method is slow and fiddly. You cut small lead wedges, tap them in by hand, and hope they stay put while you work along the course. Hall Clips remove that process entirely. The clips remain in the joint permanently, sitting behind the mortar once the job is pointed up, so there is nothing to come loose over time.

Being stainless steel throughout, there is no corrosion risk and no reaction with the lead itself. That matters on a roof expected to last 50 years or more. A bag of 50 is a practical quantity for a day’s flashing work on a standard chimney or abutment. The clips are light enough that a few bags take up almost no space in a tool bag, so there is little reason to ever run short on site.