Mini Jiffy Timber to Timber Joist Hanger Stainless Steel
From £61.90£74.28 EX VATINC VAT
Stainless steel mini joist hanger for light duty timber to timber connections. Suits loft hatches, decking, ceiling joists and trimmers. Features an anti-rotation tag on the base. Available in 44mm and 47mm widths to fit 75–100mm joist depths.
| Size | Price | QTY |
|---|---|---|
| 44mm x 75 to 100 | £61.90£74.28 | |
| 47mm x 75 to 100 | £61.90£74.28 |
Total:
£0.00
The Mini Jiffy Timber to Timber Joist Hanger is a compact, stainless steel fixing bracket designed for light duty timber connections where a standard-sized hanger would be overkill. If you are hanging a loft hatch trimmer, fixing decking joists to a beam, or tying in ceiling joists on a smaller span, this is exactly the kind of fixing that makes the job neat and properly done. Available in 44mm and 47mm widths, both covering joist depths of 75mm to 100mm, so they cover the typical size range you will encounter on these sorts of jobs.
Stainless steel construction makes these suitable for external use, which is where they earn their keep on decking projects. Galvanised hangers corrode over time in exposed conditions, and you really do not want to find that out the hard way three years after a deck is built. The stainless grade holds up in wet and humid environments without the surface degradation you get with standard zinc-plated alternatives.
Where the Mini Jiffy Joist Hanger Works Best
One thing worth knowing about this hanger is the small tag formed into the base. It sits against the supporting timber and prevents the hanger from rotating once it is nailed off, which keeps the joist sitting square and saves you fiddling around during installation. If the tag gets in the way on your particular application, it bends out easily enough. Small detail, but it is the sort of thing that makes a difference when you are working quickly and want everything to line up first time.
Designed for Light Duty Use
These are not rated for structural or heavy load applications. They are designed for the lighter end of the timber connection spectrum, which is where most trimmer and decking work sits anyway. Used correctly, they give a clean, secure connection with a minimal footprint, which matters when you are working in a tight loft space or trying to keep a deck frame looking tidy from below. Sold in boxes of ten, making them practical to buy for a single job without ending up with a bag of leftover fixings rattling around the van.
Pro Tip: When fixing into end grain on a trimmer joist, use ring shank nails rather than smooth to get a proper grip and prevent the hanger pulling away over time.
Mini Jiffy timber to timber joist hangers are used wherever a light duty, low-profile connection is needed between a joist and a supporting beam. Typical applications include loft hatch trimmers, decking subframes, ceiling joist connections and internal stud work where the loads are modest and space is tight. Joiners, carpenters and general builders reach for these when a standard hanger is physically too large or too heavy for the job in hand. The stainless steel grade also makes them the right choice for any external timber frame work where moisture exposure is a factor.
Best For
- Loft hatch trimmers
- Decking subframe connections
- Ceiling joist fixing
- Light duty timber to timber joints
- Internal stud trimmer work
Available In
- 44mm x 75 to 100mm
- 47mm x 75 to 100mm
- Stainless steel finish
Key Features
- Anti-rotation tag on base
- Tag can be bent flat if not required
- Stainless steel for external and damp environments
- Compact low-profile design
- Light duty rating suitable for trimmer and decking applications
- Sold in boxes of 10
Not suitable for: Not suitable for structural or heavy load bearing applications. These hangers are rated for light duty use only and should not be used where significant loads or primary structural connections are involved.
Offer the hanger up to the supporting beam and nail through the back plate first to hold it in position. Check the joist is sitting level before nailing off the sides. The anti-rotation tag on the base will locate against the timber automatically, keeping the hanger square during fixing. If the tag interferes with your setup, bend it flat before fitting.
Use the correct nail size for the hanger specification and avoid overdriving, which can distort the bracket. On external decking applications, use stainless or hot-dipped galvanised nails to match the bracket material and prevent bimetallic corrosion over time.
- Select the correct width to match your joist size, either 44mm or 47mm
- Offer the hanger up to the supporting beam at the required height
- Nail through the back plate to locate the hanger before fully fixing
- Check the joist fits cleanly into the hanger and sits level
- Bend the anti-rotation tag flat if it is not needed for your application
- Nail off all fixing holes in the side flanges using the appropriate nail specification
- Check the joist sits flush and square before proceeding with the build
Can these joist hangers be used on external decking?
Yes. The stainless steel construction makes them well suited for external use where moisture and weather exposure are a factor. For best results, use stainless or hot-dipped galvanised nails to avoid corrosion at the fixing points.
What is the anti-rotation tag and do I need it?
The tag is a small formed flange on the base of the hanger that locates against the supporting timber to prevent the bracket rotating during and after installation. It is useful for keeping things square quickly. If it gets in the way of your specific setup, it bends flat easily without affecting the hanger's performance.
Are these suitable for structural connections?
No. These are light duty hangers designed for applications like loft hatch trimmers, decking joists and ceiling connections. They are not rated for primary structural or heavy load bearing use. For structural applications, you will need a hanger with the appropriate load rating.
Manufactured in stainless steel for corrosion resistance in internal and external environments. The formed bracket profile provides a positive seating for the joist with a back plate for fixing to the supporting timber and side flanges for securing the joist itself. The anti-rotation tag is formed as part of the base during manufacture. Available in two widths, 44mm and 47mm, both accommodating joist depths from 75mm to 100mm.
| Material | Stainless steel |
|---|---|
| Available widths | 44mm, 47mm |
| Joist depth range | 75mm to 100mm |
| Application type | Light duty timber to timber |
| Box quantity | 10 |
| SKU | THMINISS |
| Size | 44mm x 75 to 100, 47mm x 75 to 100 |
|---|---|
| Box Quantity | 1 |
Be the first to review “Mini Jiffy Timber to Timber Joist Hanger Stainless Steel”Cancel Reply
Related products

Worktop Connectors – Zinc – Pk 6
£3.29£3.95 EX VATINC VAT
Brick Reinforcing Coil – Stainless Steel A2
From £22.90£27.48 EX VATINC VAT
Timber Dog Tooth Connectors – Double Sided – Galvanised – Box 100
£13.88£16.66 EX VATINC VAT
Herringbone Joist Struts Pack of 10
From £5.95£7.14 EX VATINC VAT

Reviews
There are no reviews yet.