£3.50£4.20Original price was: £3.50£4.20.£1.50£1.80Current price is: £1.50£1.80.EX VATINC VAT
FFP2 disposable masks offering reliable protection against fine toxic dusts and mists including wood dust, lead dust, granite, sandstone, foundry dusts, and water-based solids. Rated to EN149:2001 A1:2009. Ear loop fitting for quick, comfortable wear on site.
These FFP2 disposable masks are a straightforward, no-fuss solution for anyone working in environments where fine dusts and airborne mists are a daily reality. Whether you are cutting stone, working with treated timber, handling pesticides, or anywhere near lead dust, an FFP2-rated mask is the minimum level of protection you should be reaching for. These meet the EN149:2001 A1:2009 standard, which means they have been tested and certified to filter out the particles that can do the most damage over time.
The ear loop design makes them quick to put on and take off, which matters more than people give it credit for. When you are on a dusty job and pulling the mask up and down throughout the day, a fiddly head strap becomes a problem fast. These sit comfortably without the bulk, and they are light enough that you will actually wear one rather than leaving it in the van.
What These FFP2 Masks Protect Against
The protection range here is broad. Wood dust is the obvious one for joiners and carpenters, particularly when working with MDF or hardwoods, both of which carry serious long-term health risks. Foundry and metal dusts, granite and sandstone particles, and lead dust are all covered. Pesticide users and anyone handling water-based solid compounds will also find these appropriate for the task. It is worth noting that these are not rated for gases or vapours, so if you are painting or using solvents, you need a half-face respirator with the right cartridge, not a disposable mask. For dust and mist work though, these do the job properly.
At this price point, keeping a box in every van or on every scaffold makes sense. FFP2 disposable masks get used up, left behind, and generally lost at a rate that makes buying in bulk the only sensible approach. A box of 15 gets through a working week on a busy site without drama. Order a few boxes and forget about it.
Pro Tip: If your mask fogs your safety glasses every time you exhale, the nose wire is not shaped tightly enough to your face, so press it down firmly across the bridge of your nose and the leak, and the fog, will stop.
FFP2 disposable masks are used across a wide range of trades and site environments. Carpenters and joiners cutting MDF or hardwoods, stonemasons working with granite or sandstone, construction workers on dusty demolition jobs, agricultural workers handling pesticides, and anyone in foundry or metal fabrication environments will all find these appropriate. They are also suited to general site use where fine airborne particles are present during grinding, mixing, or bagging operations.
Best For
Wood dust including MDF and hardwoods
Foundry and metal dusts
Lead dust environments
Granite and sandstone particles
Pesticide handling
Water-based solid compounds
General construction dust
Available In
Ear loop fitting
Box of 15
Key Features
FFP2 filtration rating
EN149:2001 A1:2009 certified
Lightweight and disposable
Adjustable nose wire
Quick ear loop fitting
Not suitable for: Not suitable for protection against gases, vapours, or solvent fumes. If you are spraying paint or working with chemical vapours, you need a half-face respirator with appropriate filter cartridges instead.
Put the mask on before entering the dusty environment, not once you are already in it. Shape the nose wire firmly across the bridge of your nose to get a proper seal. A mask that lets air leak around the edges is giving you a false sense of security. Dispose of the mask at the end of the working day or sooner if it becomes damp, damaged, or visibly contaminated.
Check the mask for any visible damage before putting it on
Hold the mask over your nose and mouth and loop the ear straps around each ear
Press the nose wire down firmly across the bridge of your nose to create a seal
Perform a quick fit check by exhaling sharply and feeling for air leaking around the edges
Adjust the nose wire or ear loops if you feel any leakage
Dispose of the mask at the end of the shift or if it becomes wet, torn, or heavily soiled
Are these masks suitable for working with MDF dust?
Yes. MDF dust is classed as a hazardous fine dust, and FFP2 is the recommended minimum rating for working with it. These masks meet EN149:2001 A1:2009 and are appropriate for MDF cutting, sanding, and routing.
Can these be used for protection against spray paint or solvent fumes?
No. FFP2 disposable masks filter particles, not gases or vapours. For spray painting or solvent work you need a half-face respirator fitted with the correct organic vapour cartridges. Using a dust mask in those conditions offers no meaningful protection.
How long does each mask last?
These are single-use disposable masks. Each one should be replaced at the end of the working shift, or sooner if it becomes damp, visibly dirty, or physically damaged. A compressed or wet mask will not maintain its filtration rating.
These masks are rated to EN149:2001 A1:2009, the European standard for filtering half masks. FFP2 classification requires the mask to filter at least 94% of airborne particles. The ear loop design uses a single-layer or multi-layer melt-blown filtration medium with a shapeable nose wire to achieve a close face fit across a range of face shapes.
Protection Standard
EN149:2001 A1:2009
Mask Classification
FFP2
Fitting
Ear loop
Type
Disposable
Pack Size
15 masks per box
SKU
ZD001-KN95-FFP2
Reviews
There are no reviews yet.
Be the first to review “FFP2 Ear Loop Disposable Masks – Box 15”Cancel Reply
Reviews
There are no reviews yet.