Fischer hot dipped galvanised collated nails paired with a gas fuel cell, available in sizes from 51mm to 90mm. Compatible with all clipped head framing nailers including Paslode, Senco, Makita and Hitachi. Exceeds Eurocode 5 corrosion resistance standards.
Size
QTY
Price
QTY
63mm x 3.1mm
2200
£33.90£40.68
51mm x 2.8mm
3300
£37.90£45.48
63mm x 2.8mm
3300
£41.94£50.33
75mm x 3.1mm
2200
£32.90£39.48
90mm x 3.1mm SMOOTH
2200
£38.90£46.68
Fischer hot dipped galvanised collated nails with gas come as a complete pack: the nails and a Fischer gas fuel cell together, so you are not sourcing them separately or discovering mid-job that your gas is a different brand. Available in sizes from 51mm x 2.8mm through to 90mm x 3.1mm, in smooth and ring shank options, these nails are manufactured from European steel to German production standards and carry a hot dipped galvanised coating that exceeds Eurocode 5 corrosion resistance requirements.
Hot dipping is not the same as electroplating. The coating is thicker, more uniform, and holds up properly on structural timber connections, treated timber, and external applications where a thinner coating would start to break down over time. On fencing, decking, roof framing, and anything that lives outside, the difference matters.
Fischer Gas Fuel Cell: Built for Site Conditions
The gas fuel cell included in each pack carries no shelf life restriction and is rated to remain viable for at least five years in storage. If you buy ahead or keep stock on the van, you are not working against a use-by date. The cell operates reliably down to -15°C, which is where most standard fuel cells start to become unreliable. Cold weather structural framing, winter roofing, and open-site fencing in January are exactly the conditions where that matters.
Collation Reliability
The waxed collation strip has been tested to over 7.5 million shots without a recorded nail jam or collation failure. Nail jams slow work down and damage tempers in roughly equal measure. The wax reduces friction through the magazine and keeps drive depth consistent from the first nail to the last.
Fischer collated nails work with all clipped head framing nailers, including Paslode, Senco, Rawl, Makita, Dynamik and Hitachi. You are not locked into a single tool brand. Packs come in sturdy packaging with a carry handle, which is a small detail until you are moving across a roof frame with both hands occupied.
For structural framing, fencing, decking, and external timber work, Fischer hot dipped galvanised collated nails with gas offer a well-proven combination of coating quality, consistent drive, and cold-weather reliability.
Pro Tip: Ring shank nails offer significantly higher withdrawal resistance than smooth shank in treated timber and green oak, so if the fixings will be under ongoing tension or movement, the ring shank variants are worth specifying from the start rather than retrofitting with more fixings later.
Fischer hot dipped galvanised collated nails with gas are used primarily in structural timber framing, roof construction, fencing, decking, and external cladding. The hot dipped galvanised coating makes them suitable for treated timber and external applications where corrosion resistance is a structural requirement rather than a preference. Ring shank variants are used where withdrawal resistance is critical, such as decking boards and fence panels under wind load. Smooth shank variants suit general framing and internal structural work where drive speed is the priority.
Best For
Structural timber framing
Roof construction
Fencing and decking
External cladding
Treated timber connections
Cold weather site work
Compatible With
Paslode clipped head nailers
Senco clipped head nailers
Makita clipped head nailers
Hitachi clipped head nailers
Dynamik clipped head nailers
Rawl clipped head nailers
All standard clipped head framing nailers
Key Specifications
Sizes: 51mm x 2.8mm to 90mm x 3.1mm
Smooth and ring shank options available
Hot dipped galvanised coating
Exceeds Eurocode 5 corrosion resistance
Gas fuel cell rated to -15°C
No shelf life restriction on fuel cell
Fuel cell rated 5+ years in storage
Waxed collation strip, 7.5 million shots tested
Not suitable for: Not suitable for use with round head nailers or strip nailers. These are clipped head collated nails only. Not intended for masonry, concrete, or steel fixing applications.
Load the nail strip into the nailer magazine in the direction indicated by the tool manufacturer. Connect the Fischer gas fuel cell to the nailer as normal. Set drive depth on the tool before starting, and test on a scrap piece of the same timber to confirm depth is correct before driving into the structural work.
Drive nails perpendicular to the timber face where possible. In cold conditions, allow the tool to complete its full cycle between shots. The Fischer gas fuel cell performs down to -15°C, but driving too quickly in very cold weather can cause misfires in any gas nailer. A steady rhythm produces more consistent results than rushing.
Select the correct nail size for the timber thickness and application, using ring shank where withdrawal resistance is required.
Attach the Fischer gas fuel cell to the nailer following the tool manufacturer's connection procedure.
Load the collated nail strip into the magazine, ensuring the strip feeds correctly in the direction of travel.
Set drive depth on the nailer and test on scrap timber of the same species and thickness before starting structural work.
Position the nailer nose firmly against the timber surface, perpendicular to the face where possible.
Drive nails at a steady pace, allowing the tool to complete its full cycle between shots, particularly in cold conditions.
Check drive depth periodically throughout the pack and adjust the tool setting if timber density changes.
Will these nails work with my Paslode IM350 or IM90i nailer?
Yes. Fischer collated nails are designed for all clipped head framing nailers, and tested compatibility includes Paslode, Senco, Makita, Hitachi, Dynamik and Rawl tools. The Fischer gas fuel cell is also compatible with these nailers as a direct replacement for Paslode and other brand fuel cells.
Does the Fischer gas fuel cell have an expiry date?
No. Unlike most competitor fuel cells, the Fischer gas fuel cell carries no shelf life restriction and is rated to remain usable for at least five years in storage. It also operates reliably down to -15°C, which makes it more dependable in cold weather than standard fuel cells.
Fischer hot dipped galvanised collated nails are manufactured from high-quality European steel to German production standards. The hot dipped galvanising process applies a thicker, more consistent zinc coating than electroplating, with corrosion resistance that exceeds the requirements of Eurocode 5 for structural timber connections. The waxed plastic collation strip is engineered for consistent feed through the magazine and has been validated to over 7.5 million shots without collation failure.
Nail Sizes Available
51mm x 2.8mm, 63mm x 2.8mm, 63mm x 3.1mm, 75mm x 3.1mm, 90mm x 3.1mm
Shank Options
Smooth, Ring
Coating
Hot Dipped Galvanised
Corrosion Standard
Exceeds Eurocode 5
Material
European Steel
Collation
Waxed strip, clipped head
Gas Fuel Cell Minimum Temperature
-15°C
Gas Fuel Cell Shelf Life
No restriction, rated 5+ years
Pack Quantities
2200 or 3300 nails depending on size
Nailer Compatibility
All clipped head framing nailers
Size
51mm x 2.8mm, 63mm x 2.8mm, 63mm x 3.1mm, 75mm x 3.1mm, 90mm x 3.1mm, 90mm x 3.1mm RING, 90mm x 3.1mm SMOOTH
Box Quantity
2200, 3300
Product Type
51mm x 2.8mm (qty:3300), 63mm x 2.8mm (qty:3300), 63mm x 3.1mm (qty:2200), 75mm x 3.1mm (qty:2200), 90mm x 3.1mm (qty:2200)
Reviews
There are no reviews yet.
Be the first to review “Fischer Hot Dipped Galvanised Collated Nails with Gas Fuel Cell”Cancel Reply
Reviews
There are no reviews yet.